Home » Our Products » Alloy Steel

Alloy Steel

Pioneers in the industry, we offer en-31 alloy steel, en-41b alloy steel, en-19 alloy steel, en-8 alloy steel, en-9 alloy steel and en-24 alloy steel from India.
EN-8
EN-9
EN-19
EN-24
EN-31
EN-41B

EN-8 Alloy Steel
Application : Automobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry

Introduction : EN-8 Alloy Steel is a medium carbon steel usually supplied untreated. It has good tensile strength and is readily machinable in any condition. It can be further surface-hardened to produce components with enhanced wear resistance, typically in the range 50-55 HRC through induction processes. Equivalent Grades: 080M40, SAE(AISI) 1040.

Additional Information : Item Code: En-8
Chemical Composition :

C Mn Si S P Cr Ni Mo
.35-.45 .60-1.00 .10-.35 0.50 Max 0.50 Max - - -

Applications :
shafts, gears, stressed pins, studs, bolts, keys etc.
Request A Quote
EN-9 Alloy Steel
Application : Automobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry

We are passionately engaged in providing an exclusive array of EN-9 Alloy Steel for our esteemed clients. This product is supplied by our highly experienced professionals. In addition to this, every single product offered by us is subject to a variety of tests to ensure that it complies with the set global quality standards. Our valuable clients can avail this series flat from us at industry leading prices.

Features :
  • Rugged design
  • High strength
  • Easy to fit
Chemical Composition :

C Mn Si S P Cr Ni Mo
.50-.60 .50-.80 .5-.35 0.40 Max 0.40 Max - - -

Additional Information : Item Code: En-9
Request A Quote
EN-19 Alloy Steel
Application : Automobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry

EN-19 Alloy Steel Is a common chromium-molybdenum alloy steel, renowned for its good ductility and shock resistant and its resistance to wear properties. At low temperatures EN19 has reasonably good impact properties. It is also suitable for a variety of elevated temperature applications. For maximum wear and abrasion resistance, EN19 can be nitrided to give a shallow depth wear resistant case. Flame or induction hardening can give a case hardness of 50 HRC or higher.

Equivalent Grades :
  • BS970:1955 EN19BS970:1970 onwards: 709M40
  • Related European grades: 42CrMo4
  • Werkstoff no.: 1.7225US
  • SAE (AISI): 4140
Chemical Composition% :

C Mn Si S P Cr Mo
.35-.45 .50-.80 .10-.45 .04 .04 .90-1.40 .20-.40

Applications :
It is suitable for gears, pinions,Axles, Drive Shafts, Crankshafts, Connecting Rods, High Tensile Bolts, Studs, Propeller Shaft Joints.

Additional Information : Item Code: En-19
Request A Quote
EN-24 Alloy Steel
Application : Automobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry

EN-24 is a through-hardening alloy steel which offers excellent machinability in the “T” condition. EN24T is used in components such as heavy duty shafts, gears, studs and bolts, its hardness is in the range 248-302 HB. EN24T can be further surface-hardened by induction or nitriding processes, producing components with enhanced wear resistance. EN24 steel is a readily machinable material, widely used as engineering steel due to its tensile strength. The material provides a combination of high tensile strength with shock resistance, ductility and wear resistance. EN24T also retains its good impact properties at low temperatures which means it if often used in harsh offshore environments.

Equivalent Grades :
  • BS 970:1955 :EN24T
  • BS 970:1991 :817M40T
  • German / DIN :34CrNiMo6
  • French AFNOR :35NCD6
  • American :AISI / SAE 4340
  • German Werkstoff No. :1.6582
  • European Standard :EN10277-5
Chemical Composition% :

C Mn Si P Cr Ni Mo
.35-.45 .45 - .70 .10-.35 0.04 0.04 .90-1.40 1.30-1.80 .20-.40

Hardening :
Heat uniformly to 823/850°C until heated through. Quench in oil.Tempering: Heat uniformly and thoroughly at the selected tempering temperature, up to 660°C and hold at heat for two hours per inch of total thickness.Tempering between 250-375°C in not recommended as this can seriously reduce the steels impact value.

Stress Relieving :
Heat slowly to 650-670°C, soak well. Cool the EN24 tool in a furnace or in air.

Applications :
EN24 is often used to produce parts for heavy equipment such as locomotives, cranes, rolling mills and coal cutting machinery, gears, studs and bolts

Additional Information : Item Code: En-24
Request A Quote
En-31 Alloy Steel
Application : Automobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry

En-31 Alloy Steel is a quality high carbon alloy steel which offers a high degree of hardness with compressive strength and abrasion resistance. Because of high carbon content it has a good strength and used in moulds back plating. It is also called bearing steel.

Equivalent Grades :
  • 100Cr6, AISI SAE E52100, 100Cr6, 2258, 100C6
Chemical Composition% :

C Mn Si S P Cr Ni Mo
.90-1.20 .30-.75 .10-.35 .04 .04 1.0-1.60 - -

Annealing :
Heat uniformly to 800°C, equalise, then furnace cool. (Hardness about 229 Brinell).

Hardening :
Heat uniformly to 800/820°C until heated through. Allow 30 minutes per inch of ruling section and quench immediately in oil.

Stress Relieving :
If machining operations have been heavy or if the tool has an unbalanced section, remove stresses before hardening by heating up to 700°C, equalise, then cool slowly.

Tempering :
Heat uniformly and thoroughly at the selected tempering temperatures and hold for at least one hour per inch of total thickness.

Applications :
Ball and Roller Bearings, Spinning tools, Beading Rolls, Punches and Dies

Additional Information : Item Code: En-31
Request A Quote
EN-41B Alloy Steel
Application : Automobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry

En41B Alloy Steel is a chromium-aluminium-molybdenum nitriding steel usually supplied in the hardened and tempered condition. It is also called nitrating steel. In nitrating tratement it is hardened to a certain depth according to the application to improve the wear resistance and improve the impact load on material.

Equivalent Grades :
  • 34CrAlMo5
  • 1.8507
Steel Composition% :

C Mn Si S P Cr Ni Mo AI
.35-.45 .60 max .10-.45 .04 .04 1.50-1.80 .40max .10-.25 .90-1.30

Annealing :
Heat slowly to 650-700°C. Cool in air.

Hardening :
EN41b is supplied ready heat treated. If further heat treatment is required annealed EN41b should be heated slowly to 870-930°C and after adequate soaking at this temperature quench in oil/polymer or water. Temper as soon as tools reach room temperature.

Stress Relieving :
If machining operations have been heavy or if the tool has an unbalanced section, remove stresses before hardening by heating up to 700°C, equalise, then cool slowly.

Tempering :
Heat carefully to a suitable temperature selected by reference to a tempering chart or table.

Applications :
Typical applications include connecting rods, extruders, valve stems, dies, ring & plunger, Screw and barrel for injection moulding machines

Additional Information : Item Code: EN-41B
Request A Quote
Home   |   About Us   |   Our Products   |   Resources   |   Resources1   |   Contact Us   |   Enquiry
® 2018 Sharp Steels Company All Rights Reserved || Powered By INDIAN BUSINESS HUB